About granite sealing
Sealing, done the right way.
Sealing is protection. Most natural stone is porous — an impregnating (penetrating) sealer soaks into the surface and lines the pores so water, oil and stains bead up and sit on top instead of soaking in. It does not change the look or add a film; it buys you time to wipe a spill before it becomes a stain, and makes daily cleaning easier.
Granite's hardness means it holds a polish for years, but also that restoring it needs finer, harder diamond abrasives than marble and more passes to lift the shine. Its porosity varies hugely by variety — some black granites are nearly sealed by nature, some light ones drink oil — so sealer choice matters.
The process
How granite sealing works.
Step 01
Test & clean
We test how absorbent the surface is and deep-clean it — a sealer applied over dirt seals the dirt in.
Step 02
Dry
The floor is left to dry fully; residual moisture stops the sealer penetrating.
Step 03
Apply
The right sealer for the stone and its use is applied evenly, worked in, and the excess wiped before it hazes.
Step 04
Cure & check
After curing we water-test the surface to confirm it is repelling, and give you the re-seal interval.
Why it's worth doing
The result you get.
- ✓Spills bead up instead of soaking in — far fewer stains
- ✓Easier daily cleaning; less scrubbing
- ✓Protects a fresh polish so it lasts longer
- ✓Breathable options for outdoor and damp areas that will not peel
- ✓Slows hard-water filming and efflorescence
When you need it
Is this the right service?
Seal after any polishing or restoration, when water no longer beads on the surface, before a stone floor goes into a kitchen or bathroom, or on new stone before it is used for the first time.
More for granite
Other granite services.
Granite — all services →
Polishing, sealing, stain removal and shine restoration for granite floors and countertops.
Granite Polishing →
Polishing removes the worn, dull top layer of a floor and rebuilds a clean, reflective finish.
Granite Restoration →
Restoration is the full job — for floors that are past a simple polish.
Granite Stain Removal →
Stain removal is targeted work — drawing a specific stain out of the surface without re-doing the whole floor.
The FloorCarePro standard
What every job includes.
Free Site Assessment
We assess the floor and identify the material before quoting, so you get the right service — not the most expensive one.
Professional-Grade Products
Diamond abrasives, 3M compounds and the correct sealer or coating for your surface — applied by trained specialists.
Fixed Written Quote
A clear price in writing after the site visit. No per-day surprises, no hidden extras.
Service Warranty
Our polishing, sealing and coating work is warranted, because we stand behind the result.
Frequently asked questions
Common questions, answered.
How often does stone need re-sealing?
Every 1–3 years indoors depending on traffic and cleaning, and every 2–3 years outdoors. The simplest test: drop water on the floor — if it darkens the stone instead of beading, it is time.
My granite floor has traffic-lane dullness where the factory polish has worn — can sealing fix that?
Yes — that is exactly what sealing addresses on granite floor. We confirm the cause on the free site visit and quote the fix in writing. Seal after any polishing or restoration, when water no longer beads on the surface, before a stone floor goes into a kitchen or bathroom, or on new stone before it is used for the first time.
How do I keep my granite floor looking good afterwards?
The essentials: clean with pH-neutral stone cleaner and a microfibre mop; blot oil and grease promptly, especially on lighter granites. We leave you a written care plan for the specific finish.
Granite Sealing