FloorCarePro / Mumbai / Anti-Skid Treatment
Anti-Skid Treatment in Mumbai
An anti-skid (anti-slip) treatment increases the wet grip of a hard floor without changing how it looks. Across Mumbai & Navi Mumbai.
Get a Free Quote ↗Anti-Skid Treatment in Mumbai
Anti-Skid Treatment, done the right way.
An anti-skid (anti-slip) treatment increases the wet grip of a hard floor without changing how it looks. On stone and porcelain a controlled chemical process micro-etches the surface so it grips a wet shoe or foot; on other surfaces an invisible grip coating or an aggregate additive is used. It is measured — the aim is to move the floor above the safe wet slip-resistance threshold, not to make it rough.
In Mumbai, coastal salt air and monsoon humidity makes anti-skid treatment a job worth doing properly and on a schedule, rather than leaving it until the floor is past saving. Treat any floor that is dangerous when wet — a bathroom someone has slipped in, a lobby that streams in the monsoon, a ramp, a commercial kitchen, a pool deck, a clinic or a care home where a fall is serious.
Mumbai floors fight the coast. Salt-laden sea air, four months of monsoon humidity, and non-stop foot traffic in high-density housing wear stone and tile finishes faster than in any inland city — sea-facing flats in Bandra, Worli and Marine Drive see it worst. The other constant is the building: almost every job is inside a tower, done to society timing rules and around the service lift.
The process
How anti-skid treatment works.
Step 01
Slip test
We measure the current wet slip resistance and identify the material, so the correct treatment and dwell time are used.
Step 02
Clean & mask
The area is deep-cleaned and adjacent surfaces protected.
Step 03
Apply & dwell
The treatment is applied and held for a controlled time — too short and it fails, too long and it dulls the finish — then neutralised and rinsed.
Step 04
Re-test & document
We re-measure to confirm the floor now meets the target, and give you a before/after record.
Across Mumbai
On your schedule, in your area.
Mumbai jobs run with the building: service-lift slots, society work-timing rules, wet-slurry management to keep lobbies clean, and our own water and power arrangements where a building restricts them. We clear the plan with your building manager before we start. Coastal-grade breathable sealer is standard on every job.
Areas: South Mumbai · Western Suburbs · Central Mumbai · Navi Mumbai · Thane & beyond.
Frequently asked questions
Common questions, answered.
Which areas do you cover for anti-skid treatment in Mumbai?
All of Mumbai & Navi Mumbai — South Mumbai; Western Suburbs; Central Mumbai; Navi Mumbai; Thane & beyond. No travel charge within these areas.
Will it make my polished floor look dull?
Applied correctly, no — the process is controlled to raise grip while keeping the finish. Over-application dulls stone, which is exactly why it should be tested and timed, not just poured on.
What does anti-skid treatment cost in Mumbai?
It is priced per square foot and depends on the floor material and its condition. After a free measurement at your address you get a fixed written quote — no hidden extras.
Anti-Skid Treatment in Mumbai