FloorCarePro / Vitrified Tile
Vitrified Tile Services
Polishing, deep cleaning and stain removal for vitrified tile floors and their grout lines.
Get a Free Quote ↗About vitrified tile care
Care matched to the material.
Vitrified tiles are the default floor in modern Indian homes and offices — dense, low-porosity, and factory-finished in matt, glossy or "double-charge" surfaces. They do not need sealing or polishing in the way stone does, but they are not maintenance-free: the gloss hazes under grit, the grout lines darken, and nano-polished tiles pick up scuffs and a dull film.
FloorCarePro deep-cleans vitrified floors with the right alkaline and acidic agents, machine-scrubs the surface and grout, lifts stubborn stains and grout discolouration, and — for polished and glazed vitrified tiles that have gone hazy — re-polishes them with fine diamond pads to bring the shine back.
Our vitrified tile services
Every step, done properly.
Vitrified Tile Polishing
Polishing removes the worn, dull top layer of a floor and rebuilds a clean, reflective finish.
↗ 02Vitrified Tile Deep Cleaning
Deep cleaning is machine-driven — a rotary or orbital scrubber with the correct chemistry lifts years of ground-in grime, detergent film, grease and biological growth that mopping only spreads around.
↗ 03Vitrified Tile Stain Removal
Stain removal is targeted work — drawing a specific stain out of the surface without re-doing the whole floor.
↗What goes wrong
Common vitrified tile problems.
Vitrified tile is very hard and nearly non-porous, so the tile face rarely stains — but the cement grout between tiles is porous and does. Most "dull vitrified floor" problems are actually a film of dried detergent, hard water and grime that ordinary mopping just spreads around.
Overall haze / dullness from detergent and hard-water film
Dark, patchy, mould-spotted grout lines
Scuff marks and scratches on nano / glossy tiles
Grout haze left over from the original installation
Efflorescence — white powdery deposits at joints
Why it needs a specialist
Not a job for consumer products.
The film that dulls vitrified tiles needs a machine scrub with a proper alkaline stripper, then a controlled acidic rinse for the grout — get the concentration or dwell time wrong and you etch the grout or leave a worse film. Grout recolouring and diamond re-polishing of glazed tiles are specialist steps entirely.
Keeping it that way
How to look after your vitrified tile.
- ✓Mop with a light dilution of pH-neutral cleaner — over-dosing detergent is what causes the haze
- ✓Use a doormat; most scratches come from tracked-in grit
- ✓Have grout lines professionally cleaned and optionally sealed every 1–2 years
- ✓Avoid oil-based "tile shiners" — they build up and attract dirt
The FloorCarePro standard
What every job includes.
Free Site Assessment
We assess the floor and identify the material before quoting, so you get the right service — not the most expensive one.
Professional-Grade Products
Diamond abrasives, 3M compounds and the correct sealer or coating for your surface — applied by trained specialists.
Fixed Written Quote
A clear price in writing after the site visit. No per-day surprises, no hidden extras.
Service Warranty
Our polishing, sealing and coating work is warranted, because we stand behind the result.
Frequently asked questions
Common questions, answered.
How long does floor polishing take?
A typical 1,000–1,500 sq ft home takes one to two days. Floors needing full grinding, or larger commercial areas, take longer. We work room by room so the rest of the space stays usable.
Why does my floor look dull even though I mop it often?
Usually it is a film of dried detergent plus hard water and fine grime. Mopping adds more of it. A machine scrub with an alkaline stripper removes the film and the shine returns.
Other surfaces we restore
Book vitrified tile care